From 92ed683b436c1c33c84879e415a362a69d5529a5 Mon Sep 17 00:00:00 2001 From: finn Date: Tue, 27 Jun 2023 11:40:02 +0200 Subject: [PATCH] Created basic config for machines --- machines/configuration.nix | 156 ++++++++++++++++++++ machines/hardware-configuration.nix | 30 ++++ machines/jupiter/configuration.nix | 114 ++++++++++++++ machines/jupiter/hardware-configuration.nix | 30 ++++ 4 files changed, 330 insertions(+) create mode 100644 machines/configuration.nix create mode 100644 machines/hardware-configuration.nix create mode 100644 machines/jupiter/configuration.nix create mode 100644 machines/jupiter/hardware-configuration.nix diff --git a/machines/configuration.nix b/machines/configuration.nix new file mode 100644 index 0000000..2ebb3b6 --- /dev/null +++ b/machines/configuration.nix @@ -0,0 +1,156 @@ +# Edit this configuration file to define what should be installed on +# your system. Help is available in the configuration.nix(5) man page +# and in the NixOS manual (accessible by running ‘nixos-help’). + +{ config, pkgs, ... }: + +{ + imports = + [ # Include the results of the hardware scan. + ./hardware-configuration.nix + ]; + + # Bootloader. + boot.loader.grub.enable = true; + boot.loader.grub.device = "/dev/sda"; + boot.loader.grub.useOSProber = true; + + networking.hostName = "nixos"; # Define your hostname. + # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. + + # Configure network proxy if necessary + # networking.proxy.default = "http://user:password@proxy:port/"; + # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; + + # Enable networking + networking.networkmanager.enable = true; + + # Set your time zone. + time.timeZone = "Europe/Berlin"; + + # Select internationalisation properties. + i18n.defaultLocale = "en_US.UTF-8"; + + i18n.extraLocaleSettings = { + LC_ADDRESS = "de_DE.UTF-8"; + LC_IDENTIFICATION = "de_DE.UTF-8"; + LC_MEASUREMENT = "de_DE.UTF-8"; + LC_MONETARY = "de_DE.UTF-8"; + LC_NAME = "de_DE.UTF-8"; + LC_NUMERIC = "de_DE.UTF-8"; + LC_PAPER = "de_DE.UTF-8"; + LC_TELEPHONE = "de_DE.UTF-8"; + LC_TIME = "de_DE.UTF-8"; + }; + + # Enable the X11 windowing system. + services.xserver.enable = true; + + # Enable the GNOME Desktop Environment. + services.xserver.displayManager.gdm.enable = true; + services.xserver.desktopManager.gnome.enable = true; + + # Configure keymap in X11 + services.xserver = { + layout = "de"; + xkbVariant = ""; + }; + + # Configure console keymap + console.keyMap = "de"; + + # Enable CUPS to print documents. + services.printing.enable = true; + + # Enable sound with pipewire. + sound.enable = true; + hardware.pulseaudio.enable = false; + security.rtkit.enable = true; + services.pipewire = { + enable = true; + alsa.enable = true; + alsa.support32Bit = true; + pulse.enable = true; + # If you want to use JACK applications, uncomment this + #jack.enable = true; + + # use the example session manager (no others are packaged yet so this is enabled by default, + # no need to redefine it in your config for now) + #media-session.enable = true; + }; + + # Enable touchpad support (enabled default in most desktopManager). + # services.xserver.libinput.enable = true; + + # Define a user account. Don't forget to set a password with ‘passwd’. + users.users.finn = { + isNormalUser = true; + description = "Finn Markwitz"; + extraGroups = [ "networkmanager" "wheel" ]; + packages = with pkgs; [ + firefox + jetbrains.webstorm + jetbrains.goland + jetbrains.pycharm-professional + jetbrains.idea-ultimate + thunderbird + google-chrome + discord + spotify + keepassxc + nextcloud-client + zsh + oh-my-zsh + neovim + ]; + }; + + # Enable automatic login for the user. + services.xserver.displayManager.autoLogin.enable = true; + services.xserver.displayManager.autoLogin.user = "finn"; + + # Workaround for GNOME autologin: https://github.com/NixOS/nixpkgs/issues/103746#issuecomment-945091229 + systemd.services."getty@tty1".enable = false; + systemd.services."autovt@tty1".enable = false; + + # Allow unfree packages + nixpkgs.config.allowUnfree = true; + + # List packages installed in system profile. To search, run: + # $ nix search wget + environment.systemPackages = with pkgs; [ + vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. + wget + git + python312 + nodejs_18 + ]; + + # Some programs need SUID wrappers, can be configured further or are + # started in user sessions. + # programs.mtr.enable = true; + # programs.gnupg.agent = { + # enable = true; + # enableSSHSupport = true; + # }; + + # List services that you want to enable: + + # Enable the OpenSSH daemon. + # services.openssh.enable = true; + + # Open ports in the firewall. + # networking.firewall.allowedTCPPorts = [ ... ]; + # networking.firewall.allowedUDPPorts = [ ... ]; + # Or disable the firewall altogether. + # networking.firewall.enable = false; + + # This value determines the NixOS release from which the default + # settings for stateful data, like file locations and database versions + # on your system were taken. It‘s perfectly fine and recommended to leave + # this value at the release version of the first install of this system. + # Before changing this value read the documentation for this option + # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). + system.stateVersion = "23.05"; # Did you read the comment? + +} diff --git a/machines/hardware-configuration.nix b/machines/hardware-configuration.nix new file mode 100644 index 0000000..c8d117a --- /dev/null +++ b/machines/hardware-configuration.nix @@ -0,0 +1,30 @@ +# Do not modify this file! It was generated by ‘nixos-generate-config’ +# and may be overwritten by future invocations. Please make changes +# to /etc/nixos/configuration.nix instead. +{ config, lib, pkgs, modulesPath, ... }: + +{ + imports = [ ]; + + boot.initrd.availableKernelModules = [ "ata_piix" "ohci_pci" "ehci_pci" "ahci" "sd_mod" "sr_mod" ]; + boot.initrd.kernelModules = [ ]; + boot.kernelModules = [ ]; + boot.extraModulePackages = [ ]; + + fileSystems."/" = + { device = "/dev/disk/by-uuid/5c778ca7-57fb-44be-ac8c-ae5d2486b7ad"; + fsType = "ext4"; + }; + + swapDevices = [ ]; + + # Enables DHCP on each ethernet and wireless interface. In case of scripted networking + # (the default) this is the recommended approach. When using systemd-networkd it's + # still possible to use this option, but it's recommended to use it in conjunction + # with explicit per-interface declarations with `networking.interfaces..useDHCP`. + networking.useDHCP = lib.mkDefault true; + # networking.interfaces.enp0s3.useDHCP = lib.mkDefault true; + + nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux"; + virtualisation.virtualbox.guest.enable = true; +} diff --git a/machines/jupiter/configuration.nix b/machines/jupiter/configuration.nix new file mode 100644 index 0000000..e1923c7 --- /dev/null +++ b/machines/jupiter/configuration.nix @@ -0,0 +1,114 @@ +# Edit this configuration file to define what should be installed on +# your system. Help is available in the configuration.nix(5) man page +# and in the NixOS manual (accessible by running `nixos-help`). + +{ config, pkgs, ... }: + +{ + imports = + [ # Include the results of the hardware scan. + ./hardware-configuration.nix + ]; + + # Use the GRUB 2 boot loader. + boot.loader.grub.enable = true; + # boot.loader.grub.efiSupport = true; + # boot.loader.grub.efiInstallAsRemovable = true; + # boot.loader.efi.efiSysMountPoint = "/boot/efi"; + # Define on which hard drive you want to install Grub. + # boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only + + # networking.hostName = "nixos"; # Define your hostname. + # Pick only one of the below networking options. + # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. + # networking.networkmanager.enable = true; # Easiest to use and most distros use this by default. + + # Set your time zone. + # time.timeZone = "Europe/Amsterdam"; + + # Configure network proxy if necessary + # networking.proxy.default = "http://user:password@proxy:port/"; + # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; + + # Select internationalisation properties. + # i18n.defaultLocale = "en_US.UTF-8"; + # console = { + # font = "Lat2-Terminus16"; + # keyMap = "us"; + # useXkbConfig = true; # use xkbOptions in tty. + # }; + + # Enable the X11 windowing system. + services.xserver.enable = true; + + + # Enable the GNOME Desktop Environment. + services.xserver.displayManager.gdm.enable = true; + services.xserver.desktopManager.gnome.enable = true; + + + # Configure keymap in X11 + # services.xserver.layout = "us"; + # services.xserver.xkbOptions = "eurosign:e,caps:escape"; + + # Enable CUPS to print documents. + # services.printing.enable = true; + + # Enable sound. + # sound.enable = true; + # hardware.pulseaudio.enable = true; + + # Enable touchpad support (enabled default in most desktopManager). + # services.xserver.libinput.enable = true; + + # Define a user account. Don't forget to set a password with ‘passwd’. + # users.users.alice = { + # isNormalUser = true; + # extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user. + # packages = with pkgs; [ + # firefox + # tree + # ]; + # }; + + # List packages installed in system profile. To search, run: + # $ nix search wget + # environment.systemPackages = with pkgs; [ + # vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. + # wget + # ]; + + # Some programs need SUID wrappers, can be configured further or are + # started in user sessions. + # programs.mtr.enable = true; + # programs.gnupg.agent = { + # enable = true; + # enableSSHSupport = true; + # }; + + # List services that you want to enable: + + # Enable the OpenSSH daemon. + # services.openssh.enable = true; + + # Open ports in the firewall. + # networking.firewall.allowedTCPPorts = [ ... ]; + # networking.firewall.allowedUDPPorts = [ ... ]; + # Or disable the firewall altogether. + # networking.firewall.enable = false; + + # Copy the NixOS configuration file and link it from the resulting system + # (/run/current-system/configuration.nix). This is useful in case you + # accidentally delete configuration.nix. + # system.copySystemConfiguration = true; + + # This value determines the NixOS release from which the default + # settings for stateful data, like file locations and database versions + # on your system were taken. It's perfectly fine and recommended to leave + # this value at the release version of the first install of this system. + # Before changing this value read the documentation for this option + # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). + system.stateVersion = "23.05"; # Did you read the comment? + +} + diff --git a/machines/jupiter/hardware-configuration.nix b/machines/jupiter/hardware-configuration.nix new file mode 100644 index 0000000..c8d117a --- /dev/null +++ b/machines/jupiter/hardware-configuration.nix @@ -0,0 +1,30 @@ +# Do not modify this file! It was generated by ‘nixos-generate-config’ +# and may be overwritten by future invocations. Please make changes +# to /etc/nixos/configuration.nix instead. +{ config, lib, pkgs, modulesPath, ... }: + +{ + imports = [ ]; + + boot.initrd.availableKernelModules = [ "ata_piix" "ohci_pci" "ehci_pci" "ahci" "sd_mod" "sr_mod" ]; + boot.initrd.kernelModules = [ ]; + boot.kernelModules = [ ]; + boot.extraModulePackages = [ ]; + + fileSystems."/" = + { device = "/dev/disk/by-uuid/5c778ca7-57fb-44be-ac8c-ae5d2486b7ad"; + fsType = "ext4"; + }; + + swapDevices = [ ]; + + # Enables DHCP on each ethernet and wireless interface. In case of scripted networking + # (the default) this is the recommended approach. When using systemd-networkd it's + # still possible to use this option, but it's recommended to use it in conjunction + # with explicit per-interface declarations with `networking.interfaces..useDHCP`. + networking.useDHCP = lib.mkDefault true; + # networking.interfaces.enp0s3.useDHCP = lib.mkDefault true; + + nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux"; + virtualisation.virtualbox.guest.enable = true; +}